· 8 min read

API vs Webhook: How Business Integrations Should Connect

API vs webhook explained for business: pull vs push, when to use each, typical flows like forms to CRM, and the reliability basics every integration needs.

Summarize with AI
API vs Webhook: How Business Integrations Should Connect

An API is pull: your system asks another system for data or tells it to do something, whenever you decide. A webhook is push: the other system calls your URL the moment an event happens, such as a paid invoice or a new form submission. Most business integrations use both: a webhook to learn that something changed, and API calls to fetch details or write the result into the next system.

What is a webhook, and how is it different from an API?

An API (application programming interface) is a set of endpoints a service exposes so other software can read and change its data. Your integration sends a request ("give me orders updated since 10:00", "create this contact") and gets a response. You control the timing, the volume and the retries.

A webhook is an HTTP request the service sends to you. You register a URL, choose the events you care about, and the service posts a small JSON payload to that URL whenever one of them happens. You do not control the timing: events arrive when they happen, sometimes in bursts, sometimes twice, sometimes out of order.

The simplest way to remember it:

  • API: "I will ask when I need it." Good for lookups, bulk syncs, and actions you initiate.
  • Webhook: "Tell me when it happens." Good for reacting to events in near real time without constant checking.

Without webhooks, the only way to notice a change is polling: calling the API every few minutes and comparing results. Polling works, but it wastes requests, burns through rate limits, and adds delay equal to the polling interval. Webhooks remove that waste, but they shift responsibility to you: your endpoint must be online, fast and secure.

API vs webhook at a glance

AspectAPI (pull)Webhook (push)
Who starts the exchangeYour systemThe source system
TimingOn request or on a scheduleSeconds after the event
Typical useLookups, bulk sync, creating recordsEvent notifications
Load on limitsGrows with polling frequencyOnly when events happen
What you must hostNothing public, just a clientA public HTTPS endpoint
Main failure modeRate limits, stale dataMissed, duplicate or out-of-order events
Security checkYour API key or OAuth tokenVerify the sender's signature

When to use an API, when to use a webhook

Use a webhook when the question is "what just happened?" and the source system offers events for it. Use the API when the question is "what is the current state?" or when you need to change something.

  • Use webhooks for triggers: a payment succeeded, a deal changed stage, a form was submitted, an order was refunded.
  • Use the API for reads and writes: fetching the full customer record, creating a contact, updating an invoice, pulling a report.
  • Use scheduled API sync as a safety net: a nightly or hourly job that compares records catches anything a webhook missed.
  • Use polling only when there is no webhook: many older tools and some accounting systems expose an API but no events. Then poll on a reasonable interval and filter by "updated since".

A common mistake we see is trusting the webhook payload as the final truth. Payloads can be partial or arrive late. A safer pattern is "webhook as a doorbell": receive the event, then call the API to load the current version of the object before acting on it.

Typical business flows and how they are wired

Website forms to CRM. The visitor submits a form, your site's backend (or the form tool's webhook) sends the data to an integration endpoint, which calls the CRM API to find or create the contact, attach the source and UTM tags, and create a deal. The visitor gets a confirmation instantly; the CRM write happens in the background. Setting up this chain properly, with deduplication and lead routing, is the core of our forms to CRM integration work.

Payments to accounting. The payment provider sends a webhook such as "invoice paid" or "charge refunded". The integration verifies the signature, loads the full payment object via the provider's API, then creates or updates the invoice, payment and customer in the accounting system through its API. Money flows are where idempotency matters most: a duplicate event must never create a second invoice.

CRM to Slack. The CRM fires a webhook when a deal reaches "won" or a high-value lead arrives. The integration formats a message and posts it to a Slack channel. Slack's own docs list a limit of about one message per second for incoming webhooks, so a bulk import in the CRM that triggers hundreds of events needs a queue in between, or the channel gets flooded and requests start failing with HTTP 429.

All three follow the same shape: event in, enrich via API, write via API, notify. Once you see that pattern, most "can these two tools talk?" questions become a short checklist.

Reliability basics: what separates a demo from production

An integration that works on the first test is easy. One that still works after a timeout, a deploy, a vendor outage and a bulk import takes a few deliberate choices.

  • Respond fast, process later. Senders expect a 2xx response quickly. Shopify, for example, treats a delivery as failed if your app does not respond within five seconds. Accept the event, store it, return 200, and do the real work in a background job.
  • Expect retries. Providers resend failed deliveries, each on its own schedule. Stripe retries live-mode events with exponential backoff for up to three days; Shopify retries up to eight times over four hours and may remove a subscription that keeps failing; GitHub does not redeliver failed webhooks automatically at all. Know the policy of every source you depend on.
  • Make processing idempotent. The same event can arrive more than once. Store each event ID and skip ones you have already processed. When you call APIs that create things, use the provider's idempotency key if it offers one, or check for an existing record first.
  • Do not rely on order. Stripe states explicitly that it does not guarantee event order. "Updated" can arrive before "created". Load the current state via the API instead of applying events blindly in sequence.
  • Verify signatures. Your webhook URL is public, so anyone can post to it. Most providers sign each request with a shared secret (Stripe uses a Stripe-Signature header with an HMAC). Reject anything that fails verification and check the timestamp to block replayed requests.
  • Use a queue. A queue between "received" and "processed" absorbs bursts, lets you retry failed steps without asking the sender to resend, and keeps one slow downstream API from blocking everything else.
  • Respect rate limits. Outbound API calls hit vendor limits. Read the 429 response and the Retry-After header, back off, and batch where the API allows it.
  • Log and alert. Keep a log of every event received, every API call made and its result, with a way to replay a failed item. Alert a human when something stays failed, not when it retries once.
  • Reconcile. A scheduled job that compares counts or recent records between systems turns silent data loss into a visible, fixable report.

None of this is exotic. It is the difference between "the integration broke two weeks ago and nobody noticed" and "a payment sync failed at 3 a.m., retried, and succeeded".

Direct integration or middleware (iPaaS)?

You can connect systems directly with your own code (a small service or serverless function that receives webhooks and calls APIs) or through middleware: an integration platform such as n8n, Make or Zapier that provides triggers, connectors and a visual workflow. Both use the same APIs and webhooks underneath; the question is who owns the plumbing. We compare those platforms on cost in a separate article, so here we focus only on the architectural choice.

Middleware is faster to start, gives non-developers visibility, and handles authentication and basic retries for popular apps. Direct code gives full control over idempotency, queues, data models and performance, has no per-task pricing, and is easier to test and version, but it needs a developer to maintain it.

How to choose: our decision rule

Our rule of thumb: if the flow touches money, legal records or more than a few thousand events a day, or needs custom logic the connector cannot express, build it directly against the APIs and webhooks; otherwise start in middleware and move individual flows to code when they outgrow it.

Before building either way, answer four questions for each flow:

  • Does the source system offer a webhook for this event, or do we need to poll?
  • What happens if the same event is processed twice? If the answer is "a duplicate invoice", idempotency is mandatory.
  • How will we know it failed? Name the log, the alert and the person who gets it.
  • What is the source of truth for each field, so two systems never overwrite each other in a loop?

In projects we usually see a mix: marketing notifications and simple syncs live comfortably in an integration platform, while payments, order fulfillment and anything customer-facing runs as direct code with a queue and logging. If you need help designing that split, our API and webhook development team builds the direct integrations, and our integrations and automation service covers the wider workflow, including middleware where it fits.

FAQ

Questions & answers

Contact us

A webhook is a pattern built on the same HTTP technology as an API, but the direction is reversed. Instead of you calling the provider, the provider calls an endpoint you host. Many vendors document webhooks as part of their API, and you will usually need both to build a complete integration.

Near real time. Most deliveries arrive within seconds of the event, but delays happen during provider incidents or when your endpoint is slow and retries kick in. If a process truly cannot tolerate gaps, pair webhooks with a scheduled API check.

Serve it only over HTTPS, verify the signature header the provider sends using your endpoint secret, and reject requests with old timestamps to block replays. Keep the URL out of public code, and never trust the payload for sensitive actions without loading the object through the API.

It depends on the provider. Some retry for hours or days with growing intervals, some retry a few times and then disable the subscription, and some do not retry at all. That is why production integrations store events in a queue, monitor failures and run a periodic reconciliation.

Yes. You poll the API on a schedule, ask only for records changed since the last run, and track the last processed timestamp. It is less immediate and uses more of your rate limit, so pick an interval that matches how fresh the data really needs to be.

10+ years in business, 100+ projects, clients in 9+ countries